Our Team

TECHNICAL LEAD

Technical Lead: Engineer Man

Equipment service comes down to people in the end. Every technical decision of the division is signed off by Engineer Man, who has spent 30-plus years on the shop floor; every difficult-fault plan and overhaul proposal carries his approval.

Technical lead · Senior electromechanical engineer · Master technician

30+ years in the industry: 28 years managing large, medium and small (automated) mechanical equipment and handling difficult and recurring faults; 25+ years managing large continuous and chain-driven production lines with predictive maintenance; many years in equipment management and maintenance roles at Fortune Global 500 companies in Japan, Europe and America.

His way of working is deliberately old-school: walk the shop floor first, read the ledgers first, inspect the failed parts first - only then discuss the plan. Many so-called incurable problems turn out, in his hands, to be one loose bolt or one wrong oil grade.

28 years in equipment managementDifficult and recurring fault handling · 28 yearsContinuous / chain-type production lines · 25–30 years Predictive maintenance · 25–30 yearsFortune Global 500 backgroundLubrication and oil selection

Direct line: 18002209253 (mobile number is also on WeChat)

Fields of practice	Hands-on experience
Management of large, medium and small (automated) mechanical and electrical equipment / difficult and recurring fault handling	28 years
Equipment management on large continuous and chain-type production lines	25–30 years
Predictive equipment maintenance	25–30 years
Equipment management and maintenance roles at well-known foreign enterprises (Japanese, European and American Fortune Global 500 companies)	28 years
Total industry experience	30+ years

Special-duty expertise — lubrication management and fault prevention for large and special-duty equipment in feed plants, biomass pellet plants, building-materials plants, wastewater treatment plants and bio-fertiliser plants.

TEAM & TOOLING

Team composition and professional equipment

Staffing

A senior mechanical and electrical maintenance team

Covering the mechanical repair and electrical trades plants need most, built around Engineer Man, with dedicated service groups formed by industry characteristics — feed, building materials, wastewater treatment and other special duties each have a specialist assigned.

Professional equipment

Complete tool sets and test instruments

Equipped with complete sets of professional mechanical disassembly tools and professional electrical test & measurement instruments, we can start work as soon as we arrive — the client needs to prepare nothing extra, which shortens downtime waiting.

Back-end support

Technical backstop from the Henghuan group

Behind the team stand Guangzhou Henghuan's accumulated robotics and automation technology and Nanchong Henghuan Robotics Co., Ltd.'s manufacturing and service base. Field experience at the front and R&D capability at the rear flow in both directions, so difficult problems are backed by the entire system.

Your satisfaction is what we work for.

HOW WE ORGANIZE

How We Organise Our Crews

Equipment service is not one person showing up with a tool bag. Depending on the nature of the project and the working conditions, we organise people into four crew types — who goes to site and who stays behind is made clear in advance.

1
Emergency Repair Crew (on site the same day): A two-person team of a fitter and an electrician, carrying complete disassembly tool sets and common test instruments in the vehicle. The mission is to restore production first: whatever can be handled on site is handled on the spot, and where spare parts are needed we give exact part numbers and alternative solutions so the line is never left idling. Within Nanchong's three districts and six counties, our people usually arrive in 1–2 hours.
2
Specialist Diagnosis Crew (difficult & recurring faults): Led by Engineer Man, equipped with vibration, infrared, insulation and other test methods, with added data capture where necessary (error counts, voltage fluctuation, scan cycles). The mission is to find the root cause, not to swap parts: symptom reproduction, systematic investigation and root-cause verification are completed in three steps, followed by a written diagnostic conclusion and treatment plan.
3
Overhaul & Retrofit Crew (planned shutdown windows): Fitters, electricians and automation staff are configured per project; shutdown windows are aligned with your production plan, and spare parts and tooling are mobilised in advance. Data for every key process step is recorded item by item and confirmed by both sides — no step proceeds without a record. On completion we run double commissioning tests and re-measure precision.
4
Resident & Training Crew (annual contracts & system building): Stationed on site long-term or visiting on a regular cycle, responsible for implementing routine checks, lubrication management, precision adjustment and ledger upkeep, while coaching your own crew. The goal is to leave the standards and methods inside the plant: when our people leave, the system remains, and your own staff can step up independently.

Our Team on-site photo — Field photo: Our Team

FIELD DISCIPLINE

The Four Disciplines of Site Work

Technical skill decides whether a machine gets fixed; work discipline decides whether anything else goes wrong. These four rules are hard requirements for every site entry.

Discipline 1 · Safety

Tag it out before you touch it

Before maintenance we carry out power isolation, tagging, lockout and stored-energy release confirmation, and follow your plant's safety regulations; hot work, lifting and confined-space operations are performed under permits as required. Safety signs and maintenance tags follow GB 2894, lifting is directed by a single signaller with standard hand signals, and multi-party command is strictly eliminated.

Discipline 2 · Data

Measure first, judge second

No guessing from experience: current, temperature, vibration, insulation, clearances, alignment — nothing that should be measured is skipped. The original condition is recorded before strip-down, reassembly follows standard torque and clearance values, and all data is written into the maintenance record. For many so-called difficult faults, the answer appears once the data is measured.

Discipline 3 · Site

Work done, materials used up, site left clean

Removed parts are sorted and marked, and old parts and waste oil are collected and disposed of as required — no oil stains or loose parts are left in the workshop. The shutdown window is your production time: we work to schedule, never overrun it, and never walk away half-done.

Discipline 4 · Handover

It is only finished when your people are trained

After the job we brief the operating and maintenance staff: what was treated this time, what to watch in daily operation, and which signs mean a repair call is needed. Checklists and lubrication cards are handed over together, and delivery counts as complete only when operators pass the assessment. A repaired machine is just a passing grade — people who can run it and maintain it are the real goal.

Back-end support — Behind the site team stand Guangzhou Henghuan's accumulated robotics and automation technology and the manufacturing and service base of Nanchong Henghuan Robotics Co., Ltd. For problems that cannot be solved on site, technical solutions, spare part fabrication and automation retrofits are backed by the entire system — no one carries the load alone.